DB11 M177 V8 · Grand touring priorities · Dubai

    Aston Martin DB11 V8 Tuning & ECU Remapping in Dubai

    Aston Martin DB11 V8 tuning at DIGI-TEC in Dubai follows the supported M177 record, with a stock reference of 503 HP and 675 Nm. Compare ECU remapping and the supporting work across five stages, each with its own horsepower, torque, EUR price and workshop estimate. Engine identification matters for a grand touring project: these packages do not establish DB11 V12 tuning support.

    Al Quoz Industrial Area 3 · Vehicle-specific ECU tuning and hardware planning

    Aston Martin DB11 vehicle illustration
    Stage 1 package reference590HPfrom 503 HP stock · 750 NmConfirm exact variant and vehicle condition

    Grand Touring Performance

    Plan a DB11 V8 remap around the complete touring car

    The supported DB11 ECU tuning record is the M177 V8 configuration. Its five stages move from engine software to increasingly extensive turbo, fuel-system and engine-component work. Begin with the car’s identity, condition and intended use, then discuss how the chosen scope fits your expectations for everyday grand touring.

    A specific V8 record

    The dataset identifies M177 and gives no year range. Confirm the VIN and engine before applying its package figures; DB11 V12 tuning support is not established by this record.

    Transmission software is listed

    Stage 2 names transmission software optimization. Stage 3–5 retain TCU software in their public included-work lists.

    Higher-stage supporting components

    Stage 3 introduces the GAD 177 50/63 turbocharger. Stage 4 adds open airboxes, a Pulse Flow manifold and fuel-system work; Stage 5 also names forged pistons and other engine components.

    DB11 V8 ECU tuning and supporting-component progression

    Stage 2 names a sport-catalyst downpipe, ceramic heat coating and transmission software optimization. Stage 3 adds its GAD 177 50/63 turbocharger and TCU software. Stage 4 specifies open airboxes, GAD 177 55/63 turbochargers, a Pulse Flow manifold and an increased-flow high-pressure fuel system.

    Stage 5 adds the listed GAD 177 55/68 turbocharger, forged pistons, cylinder-head bolts, an engine gasket set, oil and oilfilter. An inherited reinforcement item has been withheld because its applicability to the DB11 transmission is unverified. The workshop must confirm any additional transmission hardware in a vehicle-specific proposal; no replacement reinforcement package is claimed here.

    Start with the right vehicle

    Aston Martin DB11: engine and generation compatibility

    Engine record
    M177
    Platform
    Confirm year and variant by VIN
    Listed options
    Stage 1 · Stage 2 · Stage 3 · Stage 4 · Stage 5

    The source does not specify a year range or a separate generation field. Send the VIN, year and engine details to confirm the vehicle matches this M177 package set; a DB11 model badge alone is insufficient.

    Stage 1 lists 590 HP and 750 Nm; Stage 5 lists 850 HP and 1,100 Nm. The higher configurations include their own turbo, fuel-system and engine-component lists, so each output belongs to its particular installed package.

    Before choosing your package

    Shape the DB11 consultation

    1. Describe the result you want

      Explain how you use the car and what you expect from a remap. Ask the workshop to review fuel requirements, current calibration and cooling condition as part of the proposed installation.

    2. Confirm gearbox hardware individually

      An inherited reinforcement description is withheld because its DB11 compatibility is unverified. Ask for the actual gearbox identification and any proposed reinforcement specification in writing.

    3. Compare software and hardware projects

      Review the Stage 1 scope separately from the later turbo and engine-component packages. The final proposal should identify the selected components, any necessary supporting work and the validation plan for your car.

    Plan your Aston Martin DB11 tune with DIGITEC

    Choose your configuration

    Aston Martin DB11 stock vs tuned: compare stages

    Full package specification

    Aston Martin DB11 · M177 · Stage 1

    Package power HP
    590

    Stock reference 503 HP · +87 HP

    Package torque Nm
    750

    Stock reference 675 Nm · +75 Nm

    Published price · EUR
    €3,346 total
    Estimated workshop time
    1–2 days

    Package reference figures, subject to vehicle, fuel, condition and agreed scope. Confirm the final quotation and currency before booking. These figures are not a dyno measurement of your vehicle. Read about vehicle checks and evidence.

    Discuss Stage 1 on WhatsApp

    Stage 1 included work

    • Airfilter
    • Optimization of engine software
    • Deactivation of the speed limiter V-Max

    The inherited transmission-reinforcement description has been withheld because its compatibility with this DB11 configuration is unverified. Confirm gearbox identification, any reinforcement work and the final package scope in the written proposal.

    Aston Martin DB11 tuning packages: full specifications and prices

    Open a model to compare every listed package. Figures, prices and workshop estimates come from the Performance Configurator. Prices remain in EUR as published. Confirm the exact vehicle, software version, existing modifications and final installation scope with the workshop before booking. Reference outputs are not a guarantee for every car.

    Aston Martin

    Aston Martin DB11 · M177

    The inherited transmission-reinforcement description has been withheld because its compatibility with this DB11 configuration is unverified. Confirm gearbox identification, any reinforcement work and the final package scope in the written proposal.

    Aston Martin DB11 — engine and stock output

    M177 · 503 HP · 675 Nm

    Available packages: Stage 1, Stage 2, Stage 3, Stage 4, Stage 5

    Aston Martin DB11: stock vs tuned power, torque, price and workshop time
    PackageStock HPTuned HPHP gainStock NmTuned NmNm gainPrice (EUR)Estimated time
    Stage 15035908767575075€3,346 total1–2 days
    Stage 2503615112675790115€10,232 total3–5 days
    Stage 3503700197675900225€18,333 total7–14 days
    Stage 45037952926751000325€33,792 total14–21 days
    Stage 55038503476751100425€56,435 total3–6 weeks
    Stage 1 — what’s included
    • Airfilter
    • Optimization of engine software
    • Deactivation of the speed limiter V-Max
    Stage 2 — what’s included
    • Airfilter
    • Optimization of engine software
    • Deactivation of the speed limiter V-Max
    • Downpipe with sport catalytic converter
    • Special ceramic heat coating
    • Transmission software optimization (TCU)
    Stage 3 — what’s included
    • Airfilter
    • Optimization of engine software
    • Deactivation of the speed limiter V-Max
    • Downpipe with sport catalytic converter
    • Upgrade turbocharger (GAD 177 50/63)
    • Special ceramic heat coating
    • TCU-Software
    Stage 4 — what’s included
    • Open airboxes
    • Optimization of engine software
    • Deactivation of the speed limiter V-Max
    • Downpipe with sport catalytic converter
    • Twin Scroll GAD Turbocharger (GAD 177 55/63)
    • Pulse Flow exhaust manifold
    • Special ceramic heat coating
    • High pressure fuel system with increased flow
    • TCU-Software
    Stage 5 — what’s included
    • Open airboxes
    • Optimization of engine software
    • Deactivation of the speed limiter V-Max
    • Downpipe with sport catalytic converter
    • GAD upgrade Twinscroll Turbocharger (GAD 177 55/68)
    • Pulse Flow exhaust manifold
    • Special ceramic heat coating
    • High pressure fuel system with increased flow
    • GAD forged pistons with lower compression
    • Cylinder head bolts
    • Engine gasket set
    • Oil & Oilfilter
    • TCU-Software

    Vehicle condition and supporting evidence

    How to assess your Aston Martin DB11 tuning proposal

    Read the figures as package references

    The power, torque, EUR prices and workshop estimates on this page come from the DIGITEC Performance Configurator. They describe its listed configurations. They are not a before-and-after measurement of your vehicle.

    Resolve running faults before choosing a tune

    Tell the workshop about warning lights, overheating, oil loss, hesitation or gearbox symptoms, including any previous tune. Identify the cause and agree any necessary repair before deciding on extra power. Software changes should not substitute for diagnosis of an existing fault.

    Ask what will be measured

    Agree the checks and evidence for the selected work. A useful dyno report identifies the vehicle, fuel, hardware, test date and conditions, and whether figures are measured at the wheels or stated at the engine. Compare baseline and final results on a consistent basis.

    DIGITEC × GAD Motors

    Define the complete tuning project

    GAD Motors lists DIGITEC as a UAE contact in Al Quoz, Dubai. Where a package names GAD software or components, the calibration supplier, component specification and installation scope should be identified in your written proposal.

    Fuel, engine health, software version, existing modifications and component compatibility affect the proposed work. The published EUR prices and time estimates describe the listed packages; confirm the final scope, currency and schedule with the workshop.

    GAD Motors tuning at DIGITEC

    Model-specific answers

    Aston Martin DB11 ECU tuning questions

    What should I consider before a DB11 V8 remap for road use?

    Discuss the fuel used, current modifications, vehicle condition and intended driving with the workshop. Compare the full M177 package scope, including the exhaust, turbo and transmission software named at the selected stage. The listed output is a package reference; the vehicle and proposal must be confirmed before work.

    Do these packages apply to every Aston Martin DB11?

    No. The supported record is specifically identified as M177, with a 503 HP / 675 Nm stock reference. The source gives no year range, so the VIN, engine and software must be checked before matching a DB11 to a listed package.

    What is the listed DB11 Stage 1 tuning price?

    Stage 1 lists €3,346 total, 1–2 days and 590 HP / 750 Nm. Its included work is an airfilter, engine software optimization and V-Max speed-limiter deactivation.

    Does the DB11 package list include transmission work?

    Stage 2 lists transmission software optimization, and Stage 3–5 list TCU software. An inherited reinforcement item is withheld because DB11 compatibility is unverified. Any transmission hardware requires a confirmed vehicle-specific proposal.

    Your car. Your specification.

    Discuss your Aston Martin DB11 tuning in Dubai

    Send your VIN, model year, fuel and current modifications to DIGITEC Performance Center in Al Quoz. We can review the matching package and agree the work before an appointment.