Stage 1 is engine software
The Urus Stage 1 included-work list names engine software optimization only. The airfilter and sport-catalyst downpipe first appear in Stage 2.
Lamborghini Urus · V8 twin-turbo stages · Dubai
For a Lamborghini Urus tune in Dubai, DIGI-TEC lists four stages for the V8 twin-turbo record with a 650 HP and 850 Nm stock reference. Stage 1 is an ECU tuning package listing engine software optimization only. Higher stages introduce the specified downpipe, heat coating, GAD turbocharger and installation kit, with an additional intercooler in Stage 4.
Al Quoz Industrial Area 3 · Vehicle-specific ECU tuning and hardware planning

Start with the right vehicle
The engine field is V8 Twin-Turbo; the source does not state an engine code, year range or generation. Confirm the VIN, original output and software version before applying these package references to a specific Urus variant.
Stage 1 lists 750 HP and 950 Nm, while Stage 4 lists 904 HP and 1,150 Nm. The corresponding package contents differ materially. The source contains no Urus TCU item, so these engine packages do not establish a gearbox-tuning offer.
Choose your configuration
Lamborghini Urus · V8 Twin-Turbo · Stage 1
Stock reference 650 HP · +100 HP
Stock reference 850 Nm · +100 Nm
Package reference figures, subject to vehicle, fuel, condition and agreed scope. Confirm the final quotation and currency before booking. These figures are not a dyno measurement of your vehicle. Read about vehicle checks and evidence.
Discuss Stage 1 on WhatsAppSuper-SUV Performance
Looking for a Lambo tune in Dubai? The Lamborghini package record here covers the Urus V8 twin-turbo configuration. Its four stages distinguish engine software, exhaust hardware, upgraded turbochargers and an intercooler package. Match the actual Urus variant before choosing a stage, particularly where the model year or original powertrain differs from the listed reference.
The Urus Stage 1 included-work list names engine software optimization only. The airfilter and sport-catalyst downpipe first appear in Stage 2.
Stage 3–4 list the GAD 825-60/71R ball-bearing Twin Scroll turbocharger and an installation kit containing cooling-water and oil lines.
Stage 4 adds a custom high-flow intercooler to its listed package. The source contains no TCU item and ends at Stage 4.
Stage 2 adds an airfilter, sport-catalyst downpipe and special ceramic heat coating. Stage 3 names the GAD 825-60/71R ball-bearing Twin Scroll turbocharger and an installation kit with cooling-water and oil lines. Stage 4 retains those listed items and adds a custom high-flow intercooler.
The record ends at Stage 4 and has no Stage 5 or VIP configuration. All four stages have euro total prices and workshop estimates. Existing modifications, hardware compatibility and inspection findings are reviewed before the exact installation scope is agreed.
Open a model to compare every listed package. Figures, prices and workshop estimates come from the Performance Configurator. Prices remain in EUR as published. Confirm the exact vehicle, software version, existing modifications and final installation scope with the workshop before booking. Reference outputs are not a guarantee for every car.
V8 Twin-Turbo · 650 HP · 850 Nm
Available packages: Stage 1, Stage 2, Stage 3, Stage 4
| Package | Stock HP | Tuned HP | HP gain | Stock Nm | Tuned Nm | Nm gain | Price (EUR) | Estimated time |
|---|---|---|---|---|---|---|---|---|
| Stage 1 | 650 | 750 | 100 | 850 | 950 | 100 | €5,418 total | 1–2 days |
| Stage 2 | 650 | 800 | 150 | 850 | 1000 | 150 | €13,842 total | 3–5 days |
| Stage 3 | 650 | 870 | 220 | 850 | 1100 | 250 | €26,842 total | 7–14 days |
| Stage 4 | 650 | 904 | 254 | 850 | 1150 | 300 | €35,992 total | 14–21 days |
Before choosing your package
Provide the VIN, year, original output and current software. The source gives no engine code, year range or separate package for other Urus powertrain variants.
For Stage 3–4, discuss the turbo installation kit, oil and cooling connections, existing cooling-system condition and any required supporting work together. Confirm the listed intercooler when comparing Stage 4.
If transmission tuning is part of your enquiry, ask the workshop to confirm whether it is available for your car. The four published Urus engine packages do not list TCU work.
Vehicle condition and supporting evidence
The power, torque, EUR prices and workshop estimates on this page come from the DIGITEC Performance Configurator. They describe its listed configurations. They are not a before-and-after measurement of your vehicle.
Tell the workshop about warning lights, overheating, oil loss, hesitation or gearbox symptoms, including any previous tune. Identify the cause and agree any necessary repair before deciding on extra power. Software changes should not substitute for diagnosis of an existing fault.
Agree the checks and evidence for the selected work. A useful dyno report identifies the vehicle, fuel, hardware, test date and conditions, and whether figures are measured at the wheels or stated at the engine. Compare baseline and final results on a consistent basis.
DIGITEC × GAD Motors
GAD Motors lists DIGITEC as a UAE contact in Al Quoz, Dubai. Where a package names GAD software or components, the calibration supplier, component specification and installation scope should be identified in your written proposal.
Fuel, engine health, software version, existing modifications and component compatibility affect the proposed work. The published EUR prices and time estimates describe the listed packages; confirm the final scope, currency and schedule with the workshop.
GAD Motors tuning at DIGITECModel-specific answers
It covers the listed V8 twin-turbo Urus record and its 650 HP / 850 Nm stock reference. The source gives no year or generation mapping. Confirm the VIN, original output and ECU software; these packages do not establish support for every Urus variant, hybrid powertrain or another Lamborghini model.
Urus Stage 1 lists engine software optimization only. Stage 2 adds the specified airfilter, downpipe and heat coating. The GAD turbocharger and its installation kit appear at Stage 3, with a custom high-flow intercooler added at Stage 4. Compare the actual work list rather than assuming every ECU tune includes hardware.
The Stage 1 list names engine software optimization only. It lists 750 HP / 950 Nm, €5,418 total and 1–2 days. No airfilter, downpipe or TCU work is listed within this Stage 1 package.
Both list the GAD 825-60/71R turbocharger and its cooling-water/oil-line installation kit. Stage 4 adds a custom high-flow intercooler and lists 904 HP / 1,150 Nm at €35,992 total, compared with Stage 3 at 870 HP / 1,100 Nm and €26,842 total.
No TCU or gearbox-tuning item appears in the Urus included-work lists. The available configurations are Stock and Stage 1–4; no Stage 5 or VIP entry is present.
Your car. Your specification.
Send your VIN, model year, fuel and current modifications to DIGITEC Performance Center in Al Quoz. We can review the matching package and agree the work before an appointment.