ECU and CPC scope
Stage 1–2 explicitly list central powertrain controller software alongside engine software. Confirm the fitted control units and software versions when requesting an E63 ECU remap.
W213 M177 · Powertrain integration · Dubai
For a Mercedes-AMG E63 tune in Dubai, compare engine calibration with the control units and drivetrain work in the selected package. The W213 M177 entry starts from a configurator reference of 612 HP and 850 Nm. Stage 1 lists 780 HP and 1,000 Nm with engine software, an airfilter, V-Max deactivation and central powertrain controller software. Stage 2–4 and an individually scoped VIP build extend this package set.
Al Quoz Industrial Area 3 · Vehicle-specific ECU tuning and hardware planning

Start with the right vehicle
This page covers the W213 M177 package set identified by the configurator. An E63 badge alone does not establish the engine, existing calibration or compatible control-unit software; send the VIN and year so the team can match the actual vehicle to this record.
CPC software is explicitly listed in Stage 1 and Stage 2. The Stage 3 and Stage 4 lists add TCU software and NAG 3 transmission reinforcement alongside their different turbocharger specifications. These entries explain why engine output and drivetrain scope should be compared together.
Performance Engineering
The W213 E63 package record ties engine software to CPC work from Stage 1. Its later stages introduce different turbochargers, TCU software and NAG 3 reinforcement. Owners comparing an E63 S Stage 1 remap or a larger build should first match their original output, software and vehicle condition to this specific reference.
Stage 1–2 explicitly list central powertrain controller software alongside engine software. Confirm the fitted control units and software versions when requesting an E63 ECU remap.
Stage 3 specifies the GAD 177 55/68 turbocharger. Stage 4 specifies GAD 177 60/76R and an increased-flow high-pressure fuel system.
Stage 3–4 list TCU software and Stage 1 NAG 3 reinforcement. Compare the stated engine torque with the reinforcement description when defining the final powertrain scope.
Stage 2 lists a sport-catalyst downpipe and special ceramic heat coating. Stage 3 specifies the GAD 177 55/68 upgrade turbocharger; Stage 4 specifies the GAD 177 60/76R turbocharger and increased-flow high-pressure fuel system. Each package has a separate total price and installation estimate.
The E63 VIP record is a custom build priced on request, with bespoke ECU calibration and dyno testing. Its listed output is a configurator project reference and requires an individual vehicle and hardware proposal.
Choose your configuration
E63 AMG · M177 · Stage 1
Stock reference 612 HP · +168 HP
Stock reference 850 Nm · +150 Nm
Package reference figures, subject to vehicle, fuel, condition and agreed scope. Confirm the final quotation and currency before booking. These figures are not a dyno measurement of your vehicle. Read about vehicle checks and evidence.
Discuss Stage 1 on WhatsAppBefore choosing your package
Provide the VIN, model year, original output and modification history. The listed reference cannot establish compatibility from the E63 or E63 S badge alone.
Stage 2 introduces a sport-catalyst downpipe and ceramic heat coating. Ask the workshop to assess cooling-system condition and existing exhaust and fuel hardware before agreeing a turbo upgrade.
Record the ECU, CPC and any TCU work in the proposal, together with the chosen hardware, fuel requirements and validation scope. A daily-use car and an extensive performance project may call for different priorities.
Open a model to compare every listed package. Figures, prices and workshop estimates come from the Performance Configurator. Prices remain in EUR as published. Confirm the exact vehicle, software version, existing modifications and final installation scope with the workshop before booking. Reference outputs are not a guarantee for every car.
M177 · 612 HP · 850 Nm
Available packages: Stage 1, Stage 2, Stage 3, Stage 4, VIP
| Package | Stock HP | Tuned HP | HP gain | Stock Nm | Tuned Nm | Nm gain | Price (EUR) | Estimated time |
|---|---|---|---|---|---|---|---|---|
| Stage 1 | 612 | 780 | 168 | 850 | 1000 | 150 | €5,663 | 1–2 days |
| Stage 2 | 612 | 820 | 208 | 850 | 1050 | 200 | €12,563 total | 3–5 days |
| Stage 3 | 612 | 860 | 248 | 850 | 1100 | 250 | €27,076 total | 7–14 days |
| Stage 4 | 612 | 940 | 328 | 850 | 1200 | 350 | €36,576 total | 14–21 days |
| VIP | 612 | 1300 | 688 | 850 | 1500 | 650 | On Request | 6–10 weeks |
Vehicle condition and supporting evidence
The power, torque, EUR prices and workshop estimates on this page come from the DIGITEC Performance Configurator. They describe its listed configurations. They are not a before-and-after measurement of your vehicle.
Tell the workshop about warning lights, overheating, oil loss, hesitation or gearbox symptoms, including any previous tune. Identify the cause and agree any necessary repair before deciding on extra power. Software changes should not substitute for diagnosis of an existing fault.
Agree the checks and evidence for the selected work. A useful dyno report identifies the vehicle, fuel, hardware, test date and conditions, and whether figures are measured at the wheels or stated at the engine. Compare baseline and final results on a consistent basis.
DIGITEC × GAD Motors
GAD Motors lists DIGITEC as a UAE contact in Al Quoz, Dubai. Where a package names GAD software or components, the calibration supplier, component specification and installation scope should be identified in your written proposal.
Fuel, engine health, software version, existing modifications and component compatibility affect the proposed work. The published EUR prices and time estimates describe the listed packages; confirm the final scope, currency and schedule with the workshop.
GAD Motors tuning at DIGITECModel-specific answers
The listed W213 M177 E63 record uses a 612 HP / 850 Nm stock reference. For an E63 S remap enquiry, confirm that the VIN, original output and installed software match that record. These figures do not establish tuning support for an older generation or every E63 variant.
The W213 M177 E63 record lists 780 HP and 1,000 Nm, compared with its stock reference of 612 HP and 850 Nm. Stage 1 is €5,663 with an estimate of 1–2 days. Match the vehicle and software before agreeing the project.
Stage 3 and Stage 4 explicitly list TCU software and Stage 1 NAG 3 automatic-transmission reinforcement, described at approximately 1,150 Nm. Stage 1 and Stage 2 list CPC software but do not name TCU work.
No. This E63 record offers Stock, Stage 1, Stage 2, Stage 3, Stage 4 and VIP. A Stage 5 package is not advertised for this vehicle.
Your car. Your specification.
Send your VIN, model year, fuel and current modifications to DIGITEC Performance Center in Al Quoz. We can review the matching package and agree the work before an appointment.