PCM and TCU at Stage 2
Stage 2 adds a sport-catalyst downpipe, PCM adjustment and TCU software to the listed engine-software and airfilter scope.
M279 S65 · Torque and refinement · Dubai
Mercedes S65 AMG tuning at DIGI-TEC in Dubai focuses on the M279 V12 package and its torque-related drivetrain requirements. The W222/W217 record starts from 630 HP and 1,000 Nm and progresses through five listed stages, with Stage 5 showing 900 HP and 1,400 Nm. Compare the engine remap with the PCM, TCU, cooling and NAG2 reinforcement work named at each stage.
Al Quoz Industrial Area 3 · Vehicle-specific ECU tuning and hardware planning
V12 Luxury Engineering
An S65 ECU remap should be discussed alongside the way this car delivers torque and the supporting transmission work. The W222/W217 M279 record progresses through five stages, introducing PCM adjustment, TCU software, turbocharger upgrades and cooling hardware at specific points. Use those distinctions to plan the scope for your luxury touring car.
Stage 2 adds a sport-catalyst downpipe, PCM adjustment and TCU software to the listed engine-software and airfilter scope.
Stage 3–4 describe Stage 1 NAG2 (7G-Tronic) reinforcement around 1,250 Nm. Stage 5 describes Stage 2 reinforcement around 1,400 Nm.
Stage 4 adds low-temperature-circuit optimization and a GAD airfilter box. Stage 5 also lists a high-performance intercooler.
Stage 2 introduces a downpipe, PCM adjustment and TCU software. Stage 3 adds the GAD 279 60/76R turbocharger and transmission reinforcement. Stage 4 lists a GAD airfilter box and low-temperature-circuit optimization; Stage 5 also names a high-performance intercooler and its different transmission reinforcement.
All five S65 tuning stages have stated euro prices and time estimates. The source contains no S65 VIP option, so the page compares only its actual Stage 1–5 configurations.
Start with the right vehicle
Match the M279 engine, body variant, control units and existing modifications to this record before discussing a package. The S65 M279 stages are distinct from the S63 M177 + Electric entry and do not establish tuning support for an unspecified S-Class.
The NAG2 (7G-Tronic) reinforcement descriptions differ between the higher stages. Stage 3–4 identify Stage 1 reinforcement around 1,250 Nm, while Stage 5 lists Stage 2 reinforcement around 1,400 Nm. Those package descriptions should be confirmed with the proposed engine and torque scope.
Choose your configuration
S65 AMG · M279 · Stage 1
Stock reference 630 HP · +50 HP
Stock reference 1000 Nm · +50 Nm
Package reference figures, subject to vehicle, fuel, condition and agreed scope. Confirm the final quotation and currency before booking. These figures are not a dyno measurement of your vehicle. Read about vehicle checks and evidence.
Discuss Stage 1 on WhatsAppBefore choosing your package
Provide the VIN, body variant and existing modifications. The S65 package record is separate from S63 and hybrid S-Class entries.
Explain the balance of everyday driving and performance you want. Ask the workshop to review cooling, transmission and torque-converter condition before proposing a stage and any supporting work.
Review the exact NAG2 work and its stated capacity with the requested engine torque. Keep the selected cooling hardware, gearbox work and validation scope together in the written proposal.
Open a model to compare every listed package. Figures, prices and workshop estimates come from the Performance Configurator. Prices remain in EUR as published. Confirm the exact vehicle, software version, existing modifications and final installation scope with the workshop before booking. Reference outputs are not a guarantee for every car.
M279 · 630 HP · 1000 Nm
Available packages: Stage 1, Stage 2, Stage 3, Stage 4, Stage 5
| Package | Stock HP | Tuned HP | HP gain | Stock Nm | Tuned Nm | Nm gain | Price (EUR) | Estimated time |
|---|---|---|---|---|---|---|---|---|
| Stage 1 | 630 | 680 | 50 | 1000 | 1050 | 50 | €3,350 | 1–2 days |
| Stage 2 | 630 | 720 | 90 | 1000 | 1100 | 100 | €18,350 total | 3–5 days |
| Stage 3 | 630 | 800 | 170 | 1000 | 1200 | 200 | €43,613 total | 7–14 days |
| Stage 4 | 630 | 850 | 220 | 1000 | 1300 | 300 | €54,713 total | 14–21 days |
| Stage 5 | 630 | 900 | 270 | 1000 | 1400 | 400 | €72,468 total | 3–6 weeks |
Vehicle condition and supporting evidence
The power, torque, EUR prices and workshop estimates on this page come from the DIGITEC Performance Configurator. They describe its listed configurations. They are not a before-and-after measurement of your vehicle.
Tell the workshop about warning lights, overheating, oil loss, hesitation or gearbox symptoms, including any previous tune. Identify the cause and agree any necessary repair before deciding on extra power. Software changes should not substitute for diagnosis of an existing fault.
Agree the checks and evidence for the selected work. A useful dyno report identifies the vehicle, fuel, hardware, test date and conditions, and whether figures are measured at the wheels or stated at the engine. Compare baseline and final results on a consistent basis.
DIGITEC × GAD Motors
GAD Motors lists DIGITEC as a UAE contact in Al Quoz, Dubai. Where a package names GAD software or components, the calibration supplier, component specification and installation scope should be identified in your written proposal.
Fuel, engine health, software version, existing modifications and component compatibility affect the proposed work. The published EUR prices and time estimates describe the listed packages; confirm the final scope, currency and schedule with the workshop.
GAD Motors tuning at DIGITECModel-specific answers
Send the VIN, body variant, ECU software details, fuel used and existing modifications. For this M279 record, discuss the intended torque level together with cooling and transmission scope. A higher-stage engine calibration does not replace the supporting work listed in that package.
The S65 M279 Stage 1 entry lists €3,350, 1–2 days and 680 HP / 1,050 Nm. The stock reference is 630 HP / 1,000 Nm. Stage 1 includes an airfilter, engine software optimization and V-Max deactivation.
The Stage 5 list includes a GAD airfilter box, engine software, V-Max deactivation, a downpipe, GAD 279 60/76R turbocharger, PCM adjustment, low-temperature-circuit optimization, a high-performance intercooler, TCU software and Stage 2 NAG2 reinforcement. It lists €72,468 total and 3–6 weeks.
No VIP configuration is present in the S65 record. The available choices are Stock and Stage 1 through Stage 5, each with its own stated package data.
Your car. Your specification.
Send your VIN, model year, fuel and current modifications to DIGITEC Performance Center in Al Quoz. We can review the matching package and agree the work before an appointment.