Stage 1 engine and CPC work
The G63 Stage 1 package lists an airfilter, engine software optimization, V-Max deactivation and CPC software. Its listed scope provides the starting point for a G63 ECU remap enquiry.
G63 M177 · SUV performance planning · Dubai
A Mercedes G63 tune at DIGI-TEC in Dubai is planned around the M177 engine, vehicle software and intended use. The listed package set uses a stock reference of 585 HP and 850 Nm. Stage 1 ECU tuning lists 780 HP and 1,000 Nm; Stage 2–4 add their specified exhaust, turbo and drivetrain work. Compare the exact scope, published price and workshop estimate before choosing a G63 performance upgrade.
Al Quoz Industrial Area 3 · Vehicle-specific ECU tuning and hardware planning

Choose your configuration
G63 AMG · M177 · Stage 1
Stock reference 585 HP · +195 HP
Stock reference 850 Nm · +150 Nm
Package reference figures, subject to vehicle, fuel, condition and agreed scope. Confirm the final quotation and currency before booking. These figures are not a dyno measurement of your vehicle. Read about vehicle checks and evidence.
Discuss Stage 1 on WhatsAppStart with the right vehicle
The configurator source identifies W463 and M177. Confirm the exact G63 year, engine, ECU/CPC software and existing modifications before applying these package references to your vehicle; this record does not define tuning support for every G-Class engine.
The G63 Stage 2 package lists exhaust-system optimization as well as a downpipe and ceramic heat coating. That additional scope distinguishes its total price from other M177 vehicles that share some of the same power figures.
Power & Capability
For a G63 tune in Dubai, compare more than a headline power figure. This M177 record progresses from engine and CPC software to exhaust optimization, upgraded turbochargers and transmission work. The G63 has its own package contents and prices, even where its reference output matches another M177 model.
The G63 Stage 1 package lists an airfilter, engine software optimization, V-Max deactivation and CPC software. Its listed scope provides the starting point for a G63 ECU remap enquiry.
Stage 2 adds a sport-catalyst downpipe, ceramic heat coating and exhaust-system optimization. That exhaust work remains part of the G63 Stage 3–4 lists.
Stage 3–4 include TCU software and NAG 3 reinforcement alongside their different GAD turbochargers. Stage 4 also names an increased-flow high-pressure fuel system.
Stage 3 adds the GAD 177 55/68 turbocharger, TCU software and NAG 3 reinforcement. Stage 4 instead specifies the GAD 177 60/76R turbocharger and an increased-flow high-pressure fuel system. The full included-work lists below preserve these differences.
VIP is an individual custom-build option with a listed reference of 1,100 HP and 1,350 Nm, bespoke ECU calibration and dyno testing. Its price is on request and its workshop estimate is 6–10 weeks. A final scope requires the specific vehicle and supporting work to be agreed.
Open a model to compare every listed package. Figures, prices and workshop estimates come from the Performance Configurator. Prices remain in EUR as published. Confirm the exact vehicle, software version, existing modifications and final installation scope with the workshop before booking. Reference outputs are not a guarantee for every car.
M177 · 585 HP · 850 Nm
Available packages: Stage 1, Stage 2, Stage 3, Stage 4, VIP
| Package | Stock HP | Tuned HP | HP gain | Stock Nm | Tuned Nm | Nm gain | Price (EUR) | Estimated time |
|---|---|---|---|---|---|---|---|---|
| Stage 1 | 585 | 780 | 195 | 850 | 1000 | 150 | €5,663 | 1–2 days |
| Stage 2 | 585 | 820 | 235 | 850 | 1050 | 200 | €14,063 total | 3–5 days |
| Stage 3 | 585 | 860 | 275 | 850 | 1100 | 250 | €28,576 total | 7–14 days |
| Stage 4 | 585 | 940 | 355 | 850 | 1200 | 350 | €38,076 total | 14–21 days |
| VIP | 585 | 1100 | 515 | 850 | 1350 | 500 | On Request | 6–10 weeks |
Before choosing your package
Send the VIN, year, original specification and current modifications. The W463 identifier in this package source does not establish support for every G-Class engine or software version.
Explain how the SUV is used and what you want from the upgrade. Ask for an assessment of cooling condition, fuel requirements and existing drivetrain condition before choosing the installation scope.
For a turbo upgrade or VIP project, request the selected components, transmission work, testing and final quotation together. VIP is an individual build with bespoke calibration and dyno testing in its source list.
Vehicle condition and supporting evidence
The power, torque, EUR prices and workshop estimates on this page come from the DIGITEC Performance Configurator. They describe its listed configurations. They are not a before-and-after measurement of your vehicle.
Tell the workshop about warning lights, overheating, oil loss, hesitation or gearbox symptoms, including any previous tune. Identify the cause and agree any necessary repair before deciding on extra power. Software changes should not substitute for diagnosis of an existing fault.
Agree the checks and evidence for the selected work. A useful dyno report identifies the vehicle, fuel, hardware, test date and conditions, and whether figures are measured at the wheels or stated at the engine. Compare baseline and final results on a consistent basis.
The G63 G 800-style body conversion record documents workshop preparation and fitment. A body conversion does not establish an engine power result or include an ECU tune unless that work is separately agreed.
DIGITEC × GAD Motors
GAD Motors lists DIGITEC as a UAE contact in Al Quoz, Dubai. Where a package names GAD software or components, the calibration supplier, component specification and installation scope should be identified in your written proposal.
Fuel, engine health, software version, existing modifications and component compatibility affect the proposed work. The published EUR prices and time estimates describe the listed packages; confirm the final scope, currency and schedule with the workshop.
GAD Motors tuning at DIGITECModel-specific answers
Contact DIGI-TEC in Al Quoz Industrial Area 3 with the VIN, model year, fuel used and current modifications. For a G63 ECU remap or Stage 1 enquiry, the team needs to match the vehicle to the listed M177 record and confirm software compatibility before proposing the work.
The G63 M177 Stage 1 entry lists €5,663 and 1–2 days. Its included work is an airfilter, engine software optimization, V-Max speed-limiter deactivation and CPC software. The listed output is 780 HP and 1,000 Nm.
Stage 2 lists 820 HP and 1,050 Nm, with a €14,063 total price and 3–5 days. Its package adds a sport-catalyst downpipe, special ceramic heat coating and exhaust-system optimization to the software and airfilter scope.
The source identifies TCU software and NAG 3 reinforcement within G63 Stage 3 and Stage 4 packages. Their availability does not establish a standalone gearbox package or TCU support for every G-Class vehicle.
Your car. Your specification.
Send your VIN, model year, fuel and current modifications to DIGITEC Performance Center in Al Quoz. We can review the matching package and agree the work before an appointment.